Advanced Training for Oil Tanker Cargo Operations (TASCO) (Set 6)

Question 1 of 30

Working instructions specifying the manner in which the ship is to be loaded and ballasted to avoid unacceptable stresses in the vessel's structure is required for tankers:

Advertisement

Questions in this Practice Set

Q1

Working instructions specifying the manner in which the ship is to be loaded and ballasted to avoid unacceptable stresses in the vessel's structure is required for tankers:

Q2

A self-contained breathing apparatus is used to

Q3

Identify correct labelling for Tanker VEC

Q4

A combustible gas indicator will operate correctly ONLY when the

Q5

Part A of the the ISGOTT Ship/Shore Safety Check-List provides operational procedures for:

Q6

The approval period for a shipboard Oil Pollution Emergency Plan expires after

Q7

Which of the listed functions is the purpose of a gas scrubber in an inert gas generation system?

Q8

With an increase in temperature the volume of flammable and combustible liquids

Q9

The standard unit of liquid volume used in the petroleum industry, as well as the tanker industry, is a __________.

Q10

Combustible gas indicators operate by drawing an air sample into the instrument

Q11

Each ship having an inert gas system must have a portable instrument to measure concentrations of hydrocarbon vapor in inert atmospheres and also to measure

Q12

As required by Reg.31 of Annex 1 of Marpol the ODMCS should be provided with a recording device for recording the discharge in litres per nautical mile and total quantity discharged. This discharge should be kept onboard at least for a period of

Q13

Which is the most accurate instrument for measuring the amount of oxygen in the atmosphere of a confined space?

Q14

After each reading of an oxygen indicator, the instrument should be purged with

Q15

The maneuvering vessel normally berths on which side during STS operations?

Q16

When the cofferdam to be purged to check the leakage and remove the leaked oil?

Q17

What does "I" stand for in the centrifugal pump diagram?

Q18

The area indicated by the number "III" in the pump diagram is known as the

Q19

How the Framo pump has almost eliminated cavitation for free flowing liquids?

Q20

State if the following is True or False? After fixing the snap on hydraulic couplings of portable Framo, secure it with locking ring—only then the arrangement is safe.

Q21

Select the correct statement regarding pressure.

Q22

How portable pumps are used?

Q23

What does "II" indicate in the pump diagram?

Q24

Which number represents the Hydraulic Motor in the pump cross-section illustration?

Q25

The part "IX" in the centrifugal pump diagram indicates

Q26

Why a two way valve is provided in the air or inert gas line provided to check the leakage of oil in the cofferdam?

Q27

From the pump illustration, identify the part marked - "IV".

Q28

How vacuum drain is done in Framo pumps?

Q29

The number "10" in the Tanker cargo pump assembly indicates a __________.

Q30

Why the cargo pump in the Framo cannot be overloaded?