Advanced Training for Oil Tanker Cargo Operations (TASCO) (Set 5)

Question 1 of 30

Your vessel is carrying 24,000 barrels (3816 cubic metres) of oil for discharge. The cargo hoses have an inside diameter of eight inches. The container around the loading manifold must hold

Advertisement

Questions in this Practice Set

Q1

Your vessel is carrying 24,000 barrels (3816 cubic metres) of oil for discharge. The cargo hoses have an inside diameter of eight inches. The container around the loading manifold must hold

Q2

It is generally NOT allowed to clean up an oil spill by using ___________ .

Q3

The total quantity of oil discharged at sea on new tankers must not exceed:

Q4

A starting interlock in the ODME ensures

Q5

A gas venting system on a tanker that has gas lines in each tank connected to a common gas main running the full length of the ship is called:

Q6

The inert gas is delivered to the cargo tanks by an inert gas deck main line. Find the correct labelling for the deck equipment items.

Q7

LNG liquid pressure is the function of liquid density and liquid level.

Q8

Pneumatically Operating Valve; what is the most critical component for correct valve operation, based on your shipboard experience of running such a system?

Q9

Advantages of using inert gas, pick one that is the main reason for its application,

Q10

Which statement about a centrifugal cargo pump is TRUE?

Q11

The total capacity of the slop tank or tanks should be not less than what percentage of the oil-carrying capacity of the vessel?

Q12

Acidic solutions are formed in cargo tanks of tankers

Q13

Tank level measurement of free water by gauging tape and plumb bob: find the labeling combination that is correct,

Q14

An inert gas generator burns what oil to generate inert gas?

Q15

Float gauges can only record liquid level greater than ___________ inches.

Q16

Back flow of inert gas is prevented by:

Q17

Continuous exposure of the float to the fluctuation in sea level can damage the ___________ .

Q18

The float gauge is provided with a ___________ valve.

Q19

Tank coating requirements developed by IMO are applicable to

Q20

A deepwell pump is a type of ___________ .

Q21

Bottom washing:

Q22

Float gauge is a commonly used device in most of the tankers.

Q23

An inert gas system is required to be fitted:

Q24

Radar gauge is a type of tank gauging equipment.

Q25

Centrifugal pumps are otherwise known as

Q26

The ring main pipeline system is extensively used on:

Q27

Class B fires are caused by

Q28

Use of Pressure-Vacuum (PV) Relief Valve; label the diagram correctly:

Q29

Cargo tank fill alarm indicator panels:

Q30

Identify the equipment in the IG system correctly: