Advanced Training for Ships subject to the IGF Code (AIGF) (Set 3)

Question 1 of 30

In structural analysis, ___________ may be used in combination with, or instead of, theoretical calculations.

A

B

C

D

Advertisement

Questions in this Practice Set

Q1

In structural analysis, ___________ may be used in combination with, or instead of, theoretical calculations.

Q2

In Load scenarios, What are the most unfavourable scenarios for all relevant phases are considered?

Q3

Reliquefaction systems has to be sized in a sufficient way also in case of ____________

Q4

Thermal oxidation is done by consumption of the vapours according to the __________________.

Q5

Insulation spaces are continually supplied with an inert gas as part of ______________

Q6

Insulation spaces is provided to monitor the _______________

Q7

In Gravity tank, what is the design pressure?

Q8

What will be covered by cofferdams acting as secondary barriers?

Q9

How is cofferdam arranged?

Q10

How will be the access to tanks and cofferdams?

Q11

What is the minimum clear opening of hatches or manholes?

Q12

What is the minimum clear opening of horizontal openings?

Q13

What is the minimum clear opening of hatches or manholes through the length and breadth of the space?

Q14

What is the minimum clear opening of vertical openings?

Q15

In pump room, what are the basic things present?

Q16

Pressure relief systems is for which type of fuel tanks?

Q17

What test is for Type A independent tanks?

Q18

For Type B tanks, the maximum primary membrane stress under test conditions of the yield will not _____________

Q19

For Type B tanks, the maximum primary maximum bending stress under test conditions of the yield will not _____________

Q20

For Type C tanks, What is the pressure vessel to a hydrostatic test at a pressure measured at the top of the tanks ?

Q21

What is the temperature of the water used for the test above the nilductility transition temperature of the material?

Q22

In Non destructive testing, What is the design temperatures?

Q23

During test, what is tested in valves?

Q24

Which type of test covers the fracture acceptable after a 180° bend?

Q25

What IS prevented in good mechanical strength?

Q26

Mechanical strength is impracticable or would cause ________

Q27

In allowable loads, liquid pressure surge during transfer operations cause

Q28

In allowable loads,the weight of suspended valves cause

Q29

In allowable loads, reaction to loading arm connections cause

Q30

High pressure gas piping systems have ____________