BrightMariner Logo BrightMariner

Type a keyword to start searching...

Use ⌘K or Ctrl+K to search from anywhere

Advanced Training for Ships subject to the IGF Code (AIGF) (Set 2)

Question 1 of 30

In allowance for bending,b = Dt0/2.5r (mm), What is r?

A
B
C
D
Advertisement

Questions in this Practice Set

Q1
In allowance for bending,b = Dt0/2.5r (mm), What is r?
Q2
In allowance for bending, What is the unit of r,mean radius of the bend?
Q3
In the minimum wall thickness, t=(to + b + c)/(1 - a/100)(mm), What is c?
Q4
In the minimum wall thickness,What is the unit of corrosion allowance,c?
Q5
The absolute minimum wall thickness are in accordance with
Q6
What is appropriate in greater design conditions used for piping, piping system and components?
Q7
In greater design conditions used for piping, piping system and components, What is the vapour pressure?
Q8
In greater design conditions used for piping, piping system and components,Where will be the initial condition of saturated vapour in the system?
Q9
What is appropriate in greater design conditions used for piping, piping system and components?
Q10
Insulation spaces are continually supplied with an inert gas as part of ______________
Q11
In IGF Code, Secondary barrier means
Q12
In IGF Code, Secondary protection means
Q13
What concept is applied to minimize the probability of a gas explosion in a machinery space with gas- fuelled machinery ?
Q14
What is Gas safe machinery spaces?
Q15
What is Emergency Shutdown-protected machinery spaces?
Q16
What will be the Gas safe machinery space failure?
Q17
Potential dangers to be avoided include
Q18
The design life of fixed liquefied gas fuel containment system __________ whichever is greater
Q19
In Liquefied gas fuel containment, The design life of portable tanks shall not be less than
Q20
The design of the secondary barrier, including spray shield if fitted will be __________
Q21
The design of the secondary barrier, including spray shield if fitted will be __________
Q22
The partial secondary barrier include means to detect a leak in the primary barrier, provision such as a _____________
Q23
What are the fundamentals to safety gas carriers?
Q24
In design loads, Load categories contains __________
Q25
In design loads, the extent to which these loads depends on the ____________
Q26
Permanent loads- Gravity loads depends on __________
Q27
Gravity loads of structures and equipment acting ____________ on the tank
Q28
What is called Functional loads?
Q29
Permanent external loads
Q30
Gravity loads