Advanced Training for Ships subject to the IGF Code (AIGF) (Set 10)

Question 1 of 30

_________ refers to the usage of other power supply sources to feed power to the ship

A

B

C

D

Advertisement

Questions in this Practice Set

Q1

_________ refers to the usage of other power supply sources to feed power to the ship

Q2

_______ reduces the emission by the ship by a great margin

Q3

Alternate Marine Power provides powers to

Q4

Which type of vessel has got the biggest disadvantage with reference to Alternate Marine Power?

Q5

Speed recovery solutions can save fuel upto

Q6

Coating is done to reduce ___________

Q7

________ is an engine for reduction of the vessels maximum speed to increase the efficiency by limiting the potential power output

Q8

LNG fuel should have after treatment systems like ___________

Q9

_______ should have after treatment systems like oxidation catalyst

Q10

The _________ tecnhnology concept is based on the lean burn principle

Q11

Slow steaming is otherwise called

Q12

Reduction in specific fuel oil consumption can be achieved by

Q13

The cooling jacket of a hybrid turbo charger is made up of which material

Q14

GCU means ___________________

Q15

_____________ utilized for gas freeing of tanks may be provided externally to the ship.

Q16

Spaces surrounding fuel tanks is filled with which type of air?

Q17

What is electrically bonded in ship's structure?

Q18

All pipelines isolated in a liquid full condition are provided with ___________

Q19

Pipework contain ____________ which is thermally insulated to an extent which will minimize condensation of moisture

Q20

Pipework contain low temperature liquid or gas which is thermally insulated to an extent which will ___________

Q21

Piping other than fuel supply piping, what is arranged in the double wall piping?

Q22

Piping other than cabling, what is arranged in the double wall piping?

Q23

What is provided that they do not create a source of ignition compromise the integrity of the double pipe?

Q24

In the minimum wall thickness, t=(to + b + c)/(1 - a/100)(mm), What is to?

Q25

Indicators fitted on the navigation bridge, ,the engine control room and the manoeuvring platform operation of Main engine

Q26

Indicators fitted on the ____________ ,the engine control room and the manoeuvring platform operation of Main engine

Q27

Where is permanently installed gas detectors fitted?

Q28

Where is redundant gas detection systems be provided?

Q29

In which area electrical equipment or wiring are not installed unless essential for operational purposes or safety enhancement?

Q30

How is the lighting system in hazardous areas be divided ?